Quick Start
08.07
5 Start
up
5.1. Overview
Checklist:
Before the system will be start up the first time, go through the following checklist:
•
Are all units connected in the right way?
•
Have you taken into account the proper ambient and environmental conditions for the
device and the connected I/O modules, as described in the technical information?
•
Have you learned how to connect the equipotent bonding?
•
Have you learned how to connect the power supply?
•
Read over this information in the respective „connecting“ chapter of the operating
instructions. Pleas follow the guidelines?
Attention
!
Don’t use the USB interface for external devices on the remote device if the ambient
temperature is between 45 °C and 50 °C.
Caution
Condensation
When transporting the device in low temperatures, ensure that no moisture gets on or in the
device. This also applies if the device is subjected to extreme changes in temperature. Wait 12
hours before switching the device on.
Allow the device to slowly adjust to room temperature before commissioning the device. Do not
subject the device to direct heat radiation from devices such as heaters.
I/O modules
Connect the I/O modules using shielded cable and metal plugs. Otherwise, the specified norms
and specifications declared by Siemens AG are no longer valid. Secure the plugs of the interface
cables to the PC housing with screws. This improves the electrical shielding
Start up
Do not switch off the device during the start up. Otherwise parts of the software, which are
necessary for trouble-free operation, will be lost.
Requirements
•
A mouse is connected.
•
A keyboard is connected.
Panel PC Remote Kit
49
A5E00447267V
Doc.No.:b40013de1.doc
