Siemens SICHARGE D 8EM5907-0AA00-1AA7.01 Скачать руководство пользователя страница 67

Страница: 67 / 107

Installation and mounting

5.6 Connecting the charging station

SICHARGE D

Operating Instructions, 02/2021, 8EM5907-0AA00-1AA7.01

CAUTION

Use personal protective equipment (PPE)

Use the required personal protective equipment for the work, such as:
•

Protective shoes

•

Helmet

•

Safety vest

•

Gloves

•

Protective goggles

CAUTION

Accident risks

Avoid accidents and damage to persons, vehicles and the SICHARGE D. Accident risks

include inattention, danger of slipping and tripping and vandalism.
Provide additional protective measures, such as:
•

Warning signs

•

Safe location of SICHARGE D

•

Barriers

•

Training of drivers and operators

•

Sufficient lighting

•

Keep the installation site tidy

CAUTION

Safety area for mounting

Create a safety area around the mounting surface with warning signs and barriers.

CAUTION

Risk of crushing or cuts

When mounting, look out for moving parts and protruding cables and bolts.

CAUTION

Risk of tripping or slipping

Keep the work area clean and tidy to prevent tripping and slipping.

5.6.2

Mains connection

To connect the charging station to the supply network, connect the power cable to the

busbars of the charging station. Use the fastening material pre-mounted on the connection

bars of the charging station.

Содержание SICHARGE D 8EM5907-0AA00-1AA7.01












































































































Результаты поиска

Содержание SICHARGE D 8EM5907-0AA00-1AA7.01

Отзывы:

Похожие инструкции для SICHARGE D 8EM5907-0AA00-1AA7.01

Бренды по названию

Популярные бренды

Siemens SICHARGE D 8EM5907-0AA00-1AA7.01, Руководство по эксплуатации

Результаты поиска

Содержание SICHARGE D 8EM5907-0AA00-1AA7.01

Отзывы:

Похожие инструкции для SICHARGE D 8EM5907-0AA00-1AA7.01

Бренды по названию

Популярные бренды