manualshive.com logo in svg

Siemens SENTRON PAC3100, Руководство пользователя, Страница: 51 / 152

Поделиться
Скачать
Siemens SENTRON PAC3100 Скачать руководство пользователя страница 51

 

SENTRON PAC3100 
Manual, 07/2009, A5E02385159B-01 

51

 

Commissioning 

7

7.1

 

Overview 

Prerequisites    

1.

 

The device has been installed. 

2.

 

The device has been connected in accordance with the possible connection methods. 

The device must be connected to the bus for communication via the RS 485 interface. 

Steps for starting up the device   

1.

 

Apply the supply voltage 

2.

 

Parameterize the device 

3.

 

Apply the measuring voltage 

4.

 

Apply the measuring current 

5.

 

Check the displayed measured values 

 

NOTICE 

 

Check the connections 
Incorrect connection can result in malfunctions and failure of the device. 
Before starting up the SENTRON PAC3100, check that all connections are correct. 

 

7.2

 

Applying the supply voltage 

A supply voltage is required to operate the device. Please consult the technical data or the 

type plate for the type and level of the possible supply voltage. 

 

WARNING 

 

Do not apply voltage in excess of the rated voltage limit 
Failure to do so may result in death, serious injury, or property damage 
The limits given in the technical data and on the type plate must not be exceeded even at 

startup or when testing the device. 

 

Содержание SENTRON PAC3100

























































































































































Отзывы:

Нет отзывов