Siemens SENTRON ATC6500, Руководство пользователя

Страница: 147 / 256

Operation
8.2 Inputs and outputs of the ATC6500
3KC ATC6500 transfer control device
Manual, 05/2019, L1V30538268002A-01
145
8.2.2 Digital inputs INPx
The ATC6500 has 8 permanently integrated digital inputs which are designated as INPx. The
number of digital inputs can be increased by using expansion modules. For further
information, please refer to chapter Expandability by modules (Page 56).
Designation Description Mounted on the device Expandable
INPx Digital input 1-8 9-20
The function of the integrated digital inputs can be freely parameterized by the user:
● Design of the switching input: Negative
● Maximum input current: ≤ 8 mA
● Maximum signal voltage for <0>: ≤ 2.2 V
● Minimum signal voltage for <1>: ≥ 3.4 V
● Minimum input signal delay: ≥ 50 ms
The following inputs are installed on the ATC6500:
Designation Pin Description Recommended cable cross-section
Digital inputs
INPx
39 COM Common control terminal for
inputs INP1-8
0.2 - 2.5 mm
2
(24 - 12 AWG) acc.
to UL:
0.75 - 2.5 mm
2
(18 - 12 AWG) acc.
to UL 508
40 INP1 Digital input 1
41 INP2 Digital input 2
42 INP3 Digital input 3
43 INP4 Digital input 4
44 INP5 Digital input 5
45 INP6 Digital input 6
46 INP7 Digital input 7
47 INP8 Digital input 8
8.2.3 Table of functions of the digital inputs
The table below lists all functions that can be assigned to the programmable digital inputs
INPx. Each input can be set for the reverse function NO, as well as delayed energizing or
de-energizing, at independently set times. Some functions require another numeric
parameter; this is defined in the index (x) specified by parameter P12.n.02 (channel
number).
For more detailed information, see menu P12 - Digital inputs (Page 179).
Note
Use of an index (channel number)
An index is used if functions are to be linked to one another. For example, an input can
function as a source for a counter or for a user alarm.