21
Quick Start Guide
Gigaset SE366 WLAN / multilanguage / A31008-M1063-R601-2-9P43_27-11-2008 / qig_Gigaset366.fm / 12.05.2009
Te
m
plat
e 2004
_12
_27
Connecting PCs in wireless mode with the WPS
If you are using the WPS function, you can set up the wireless connection to other WLAN
devices quite simply using the registration button.
ì
Press the registration button on the device's back panel for at least two minutes to
start WPS registration.
ì
Activate WPS registration of the wireless network adapter on the PC within two
minutes. The client receives the security data for the Gigaset SE366 WLAN (SSID and
pre-shared key) and is thereby registered.
Only one client is allowed to register during a single registration phase. If the device
indicates by means of the WLAN LED that more than one client has tried to register, and
if the desired client has not registered successfully, an external device may have connec-
ted to your WLAN. In this case, you should manually change the WPA-PSK key as quickly
as possible and perform the WPS registration for the clients using a PIN (see the user
guide on the CD).
Connecting PCs in wired mode
If you are not using WPS, we recommend you first connect the device to a PC using an
Ethernet cable. Depending on use, you will first have to make some settings using the
browser-based configuration program of your Gigaset SE366 WLAN.
ì
Connect one of the yellow LAN sockets (
LAN1
–
LAN4
) at the rear of the Gigaset
SE366 WLAN to the Ethernet connection on a PC. To do this, use an Ethernet cable
with RJ-45 jacks. You can also use the yellow Ethernet cable supplied with the
device.
The four LAN connections can automatically set the transmission speed to 10 Mbps
Ethernet or 100 Mbps Fast Ethernet, and the transmission mode to halfduplex or
fullduplex depending on the performance of the network adapter in your PC.
WLAN LED displays during WPS registration:
On (300 s)
WPS registration was successful.
Flashing slowly
WPS registration is in progress.
Flashing quickly
WPS registration was not successful.
Flashing quickly with
interruption
More than one client tried to register.
