Siemens SD 270 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 84

Siemens SD 270 Скачать руководство пользователя страница 45

45

8.3 Mains adapter maintenance

Before use check the mains AC adapter for signs of wear and/or
damage. If you find any, please replace it immediately by
contacting your local service department (see Annexx 5), requesting
part number: 106 75 033.

CAUTION!
Do not use any other mains adapter with this instrument.
See section 2.3.

8.4 Perform listening check

Important Note:

It is strongly recommended to check the proper function
and calibration of the signal levels on a regular base.

The listening check can be done by testing the own hearing abi-
lity and compare the results to a reference. In case deviations are
found, the instrument shall not be further used for patient testing
until a new calibration has been applied (see section 10)

It is recommended to perform this listening check at least on a
daily base or in case it is more rarely used, before performing
patient testing.

«
...
43
44
45
46
47
...
»

Содержание SD 270





















































































Отзывы:

Нет отзывов