Operating Instruction
LCD-Monitor SCD 1815-E
page 34 / 52
DOC-Nr.:
B30055DE6.doc
1.2.1. Instructions
for
Handling Assemblies Susceptible to
Electrostatic Shock
Most of the assemblies within the SCD 1815-E LCD-monitor contain components which can
be destroyed by electrostatic voltages. It is also possible for the assemblies to be damaged in
such a way that total failure does not occur.
If you (as an authorised service technician) are handling such assemblies then the following
precautions should be observed:
•
•
•
•
When such assemblies are being handled, a means of electrostatic discharge must be
available. This can be, for example, an earthed object, which can be touched to discharge
electrostatic voltages.
This applies to all tools used (insulated). They must also be discharged at an earthed
object.
When assemblies are removed or added to the system, the unit must always be switched
off and the power supply cable disconnected.
Vulnerable assemblies should always be held by their edges. Avoid touching tracks and
contact pins.
