Private Communication Systems
Mobile Phones
V1.3
17
PN MP ST
D. Schnoor
10/97
If you are using a phase 1 SIM-Card you will see the following:
Allow only
Set / Clear
PHONECODE
This will limit all outgoing calls to the numbers stored in the normal
Phonebook.
3.4
Allow last 1-5
Set / Clear
PHONECODE
This will limit all outgoing calls to the numbers
stored in the redail list (maximum five numbers!)
3.5
Call Screening
Set / Clear
PHONECODE
This feature will filter the incoming calls. If a call comes in which
number is stored in the phonebook, the phone will ring.
Otherwise the phone will only give an indication on the display.
3.6
SIM Lock
3.6.1 Prevent new SIM
Set / Clear
PHONECODE
If you set this feature, the phonecode will
be activated.
Whenever another SIM-Card is inserted,
the phone will ask for the phonecode.
3.6.2 Network Lock
Set / Clear
NETWORKCODE
If you have a network lock activated,
the phone will only accept SIM-Cards
of this network operator.
3.6.3 Service-P. Lock
Set / Clear
SERV.-P. CODE
If you have a service provider lock
activated,
the phone will only accept
SIM-Cards of this service providers.
3.7
Loan Phone
Set / Clear
PHONECODE
If you set this feature, the „Prevent new SIM“
feature will be activated, and you cannot change
the charging information anymore.
3.8
Network Barring
3.8.1 All Calls Out
Set / Clear
PASSWORD
No outgoing calls possible
3.8.2 Out Internat.
Set / Clear
PASSWORD
Just national calls allowed
3.8.3 Out Int.excHome
Set / Clear
PASSWORD
No international calls except to the home PLMN