4 / 14
Siemens
RXM21.1 - PL-Link IO Block
CM2N3835en_01
Building Technologies
07 Mar 2012
ID-number
(Unique serial number)
Barcode for ID, Code 128
Protective category
Temperature range
(0 ... 50 °C)
Test date, series
(Z, A, B, C ...)
Serial number
Observe notes in this document
All connection terminals are plug-in terminals. The terminals are separated to
prevent faulty wiring for terminals connected to AC 230 V (supply, relay outputs).
STOP
Note
Warning!
Cable strain relief for lines for terminals 19 ... 28
(AC230 V) is mandatory. Attach the lines to the
related lugs on the housing base using cable
blinders (see picture, right).
Plug-in terminals connected to power must be
removed from power prior to plug-in or plug-out!
38
73
J0
4
The PL-Link I/O-Block RXM21.1 contains the following interfaces:
•
PL-Link terminals.
•
RJ45 tool plug for FW upgrade (proprietary, a Siemens connection cable is
required).
Warning!
•
Only trained electrical installation staff may connect the tool plug (RJ45)!
Adjacent terminal may be powered.
•
Do not connect Ethernet to the RJ45 plug! The device at the other end might be
destroyed!
Disposal
"The device is considered electronics device for disposal in terms of European
Directive 2002/96/EG (WEEE) and may not be disposed of as domestic garbage.
The device must be disposed of via the proper channels.
Follow all local and currently applicable laws and regulations.
Label
Connection terminals
Communication
