Changing the ON/OFF Times
The RWB2 is supplied with factory settings (See
Factory Settings) which will operate unless you
change the set times.
If you wish to change the factory settings to your
own times you can do this easily.
No. 1 tappet (orange)
is the first ON during the 24 hour period
No. 2 tappet (blue)
is the first OFF during the 24 hour period
No. 3 tappet (orange)
is the second ON during the 24 hour period
No. 4 tappet (blue)
is the second OFF during the 24 hour period
To set tappets to your own programme times hold
the dial and slide the relevant tappet and rotate it in
either direction to your desired time, then rotate dial
through a full 24 hour rotation.
NB: This should be carried out with the Programmer
connected and power supply switched onto the
backplate.
Power Failure
In the event of a mains power failure do not move
the dial until power has been restored. If the dial has
accidentally been moved during a power failure
then rotate the dial through a full 24 hour rotation
before resetting to actual time.
NOTES:
PAGE 4
INSTALLATION AND USER INSTRUCTIONS - RWB2
