Siemens RUGGEDCOM WIN7251, Руководство по установке

Страница: 44 / 48

Chapter 5
Certification
RUGGEDCOM WIN7251
Installation Guide
36 CSA
It is specifically approved for use in hazardous locations defined as:
• Class I, Division 2, Groups A, B, C, D T4
• Ex nA nC IIC T4 Gc X II 3G
Notices specific to MET Laboratories:
WARNING!
EXPLOSION HAZARD
• Substitution of components may impair suitability for Class I, Division 2
• Do not disconnect equipment unless power has been switched off or the area is known to be non-
hazardous
AVERTISSEMENT !
RISQUE D’EXPLOSION
• La substitution decomposants peut rendre ce matériel inacceptable pour les emplacements de Classe
I, Division 2
• Avant de déconnecter l’equipment, couper le courant ou s’assurer que l’emplacement est désigné
non dangereux
Section 5.1.2
CSA
This base station meets the requirements of the following Canadian Standards Association (CSA) standards:
•
CAN/CSA-C22.2 No. 60950-1-07+A1:2011+A2:2014
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-National Standard, with UL
60950-1)
• CAN/CSA-C22.2 No. 60950-22-07+GI1:2012
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors (Bi-National
standard, with UL 60950-22)
Section 5.1.3
TÜV Rheinland
This base station is certified by TÜV Rheinland to meet the requirements of the following standards:
•
UL 60950-1:2007 R10.14
Information Technology Equipment – Safety – Part 1: General Requirements
• UL 60950-22:2007 R12.11
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors
The base station is marked with a TÜV Rheinland marking and can be used throughout the European community.