Siemens RUGGEDCOM WiN5100, Руководство пользователя, Страница: 70 / 114

Chapter 6
CPE Management Interface
RUGGEDCOM WiN5100/WiN5200
User Guide
62 SNMP Administration
Field Description
Values: OK | Not Started | In Process | Failure
5. To cancel a download or upload operation that is currently in progress:
• Click the Cancel button.
Section 6.2.9
SNMP Administration
In SNMP administration, you enable and disable SNMPv2 and SNMPv3, configure trap destinations, SNMP
communities, and MIB2 system identification parameters.
For instructions on enabling and disabling SNMPv2 and SNMPv3, and on setting SNMP trap destinations, see
Section 6.2.9.1, “SNMP General Settings” .
For instructions on configuring SNMPv2, see Section 6.2.9.2, “SNMPv2 Configuration” .
For instructions on configuring SNMPv3, see Section 6.2.9.3, “SNMPv3 Configuration” .
For instructions on setting the MIB2 system identification information, see Section 6.2.9.5, “MIB2 System” .
Section 6.2.9.1
SNMP General Settings
On the SNMP General Settings pane, you can enable or disable SNMPv2 and SNMPv3, set the SNMP trap
destinations, and access the SNMPv2 and SNMPv3 configuration settings. You can specify up to five trap
destination addresses.
Procedure: Setting the SNMP general settings
1. Click the Admin button. The Admin options appear in the options pane.
2. In the options pane, click the SNMP link, and then click the SNMP General Settings link. The SNMP
General Settings pane appears.