Siemens RUGGEDCOM RX1510, Руководство пользователя

Страница: 690 / 856

Chapter 5
Setup and Configuration
RUGGEDCOM ROX II
User Guide
658 Deleting an IP Address
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.29.8.3
Deleting an IP Address
To delete the IP address of a remote L2 protocols server from a generic tunnel configuration, do the following:
1. Change the mode to
Edit Private or Edit Exclusive .
2. Navigate to tunnel » l2tunneld » generic » {name} » remote-daemon » ip-address , where {name} is the
name of the generic tunnel. The Remote Daemon IP Address table appears.
2 3 1
Figure 775: Remote Daemon IP Address Table
1. Add Button 2. Edit Button 3. Delete Button
3. Click
Delete
next to the chosen IP address.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click
Exit Transaction
or continue making changes.
Section 5.29.9
Managing Remote Daemon Egress Interfaces for Generic
Tunnels
The following sections describe how to configure and manage remote daemon egress interfaces for generic
tunnels:
•
Section 5.29.9.1, “Viewing a List of Egress Interfaces”
• Section 5.29.9.2, “Adding an Egress Interface”
• Section 5.29.9.3, “Deleting an Egress Interface”