Siemens RUGGEDCOM RSG2200, Руководство по установке

Страница: 41 / 52

Technical Specifications
5.6 Operating Environment
d
Typical distance. The maximum segment length is greatly dependent on factors such as fiber quality, and the number of
patches and splices. Consult a Siemens sales associates when determining maximum segment distances.
GBIC Gigabit (1 Gbps) Transceiver Specifications
Note
GBIC transceivers have a temperature range of -40 to 85 °C (-40 to 185 °F), unless
specified otherwise.
Tx (dBm)
c
Mode Connec-
tor Type
Cable
Type
(µm)
a
Tx λ
(nm)
b
Minimum Maximum
Rx Sen-
sitivity
(dBm)
c
Rx Sat-
uration
(dBm)
c
Distance
(km)
d
Pow-
er Bud-
get (dB)
SM SC 9/125 1310 -9.5 -3 -21 -3 10 11.5
SM SC 9/125 1310 -7 -3 -24 -3 25 17
SM
e
SC 9/125 1550 0 5 -23 -3 70 23
a
All cabling is duplex type unless specified otherwise.
b
Typical.
c
All optical power numbers are listed as dBm averages.
d
Typical distance. The maximum segment length is greatly dependent on factors such as fiber quality, and the number of
patches and splices. Consult a Siemens sales associates when determining maximum segment distances.
e
Operating temperature range of -25 to 85 °C (-13 to 185 °F).
5.6 Operating Environment
The RUGGEDCOM RSG2200 is rated to operate under the following environmental
conditions.
Ambient Operating
Temperature
a b
-40 to 85°C (-40 to 185 °F)
Ambient Storage Tem-
perature
-40 to 85°C (-40 to 185 °F)
Ambient Relative Hu-
midity
c
5% to 95%
Maximum Altitude 2000 m (6562 ft)
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
b
Operating temperature may vary based on the limitations of installed SFPs. Refer to the RUGGEDCOM
SFP Transceivers Catalog for SFP temperature ratings.
c
Non-condensing
5.7 Mechanical Specifications
Weight 4.8 kg (10.6 lbs)
Ingress Protection IP20
Enclosure 18 AWG Galvanized Steel
34
RUGGEDCOM RSG2200
Installation Manual, 01/2020, C79000-G8976-1043-15