Siemens RUGGEDCOM RSG2100 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 54

background image

RUGGEDCOM RSG2100

Installation Guide

Chapter 1

Introduction

Feature Highlights

1

Introduction

The RUGGEDCOM RUGGEDCOM RSG2100 is a rugged, fully managed, modular Ethernet switch specifically

designed to operate reliably in electrically harsh and climatically demanding utility substation, railway and

industrial environments. The RUGGEDCOM RSG2100’s superior rugged hardware design coupled with the

embedded Rugged Operating System (ROS) provides improved system reliability and advanced cyber security and

networking features, making it ideally suited for creating Ethernet networks for mission-critical, real-time, control

applications.
The RUGGEDCOM RSG2100’s modular flexibility offers 10BaseFL/100BaseFX/1000BaseX fiber and

10/100/1000BaseTX copper port combinations. Optional front or rear mount connectors make the RUGGEDCOM

RSG2100 highly versatile for any application and can support multiple fiber connectors (ST, MTRJ, LC, SC) without

loss of port density. The RUGGEDCOM RSG2100 is packaged in a rugged galvanized steel enclosure with industrial

grade DIN, panel, or 48 cm (19 in) rack-mount mounting options.

CONTENTS

•

Section 1.1, “Feature Highlights”

•

Section 1.2, “Description”

Section 1.1

Feature Highlights

Ethernet Ports

• Up to 3 x Gigabit Ethernet ports (copper and fiber)
• Up to 16 x 100Base-FX Fiber Fast Ethernet ports (copper and fiber)
• 2-port modules for tremendous flexibility
• Non-blocking, store and forward switching
• Supports many types of fiber (multimode, single mode, bidirectional single strand)
• Long haul optics allow Gigabit at distances up to 70 km
• Multiple connector types (ST, MTRJ, LC, SC)

Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges
• Zero-Packet-Loss™ technology
• -40 to 85 °C (-40 to 185 °F) operating temperature (no fans)
• Conformal coated printed circuit boards (optional)
• 18 AWG galvanized steel enclosure
• Hazardous Location Certification: Class 1 Division 2

«
...
7
8
9
10
11
...
»

Содержание RUGGEDCOM RSG2100























































Отзывы:

Нет отзывов

Похожие инструкции для RUGGEDCOM RSG2100

Бренд: Panasonic Страницы: 4

Бренд: BandLuxe Страницы: 67

Бренд: Cabletron Systems Страницы: 21

Бренд: Qlogic Страницы: 2

Бренд: Qlogic Страницы: 172

Бренд: NETGEAR Страницы: 169

Бренд: Qixiang Technology Страницы: 16

Бренд: RAIDAGE Страницы: 60

Бренд: Lanner Страницы: 38

Бренд: Allied Telesis Страницы: 34

Бренд: BHU NETWORKS Страницы: 75

Бренд: Idis Страницы: 17

IGS-5225-20T4C2X

Бренд: Planet Страницы: 16

Бренд: Lantronix Страницы: 75

Бренд: ZyXEL Communications Страницы: 2

Бренд: ADTRAN Страницы: 9

VAR-SOM-MX8M-PLUS

Бренд: Variscite Страницы: 2

Бренд: New Media Technology Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды