Siemens RUGGEDCOM RS920W Скачать руководство пользователя страница 7

Страница: 7 / 44

RUGGEDCOM RS920W

Installation Guide

Preface

Alerts

vii

Preface

This guide describes the RUGGEDCOM RS920W. It describes the major features of the device, installation,

commissioning and important technical specifications.
It is intended for use by network technical support personnel who are responsible for the installation,

commissioning and maintenance of the device. It is also recommended for use by network and system planners,

system programmers, and line technicians.

CONTENTS

•

“Alerts”

•

“Related Documents”

•

“Accessing Documentation”

•

“Training”

•

“Customer Support”

Alerts

The following types of alerts are used when necessary to highlight important information.

DANGER!

DANGER alerts describe imminently hazardous situations that, if not avoided, will result in death or

serious injury.

WARNING!

WARNING alerts describe hazardous situations that, if not avoided, may result in serious injury and/or

equipment damage.

CAUTION!

CAUTION alerts describe hazardous situations that, if not avoided, may result in equipment damage.

IMPORTANT!

IMPORTANT alerts provide important information that should be known before performing a procedure

or step, or using a feature.

NOTE

NOTE alerts provide additional information, such as facts, tips and details.

Содержание RUGGEDCOM RS920W













































Результаты поиска

Содержание RUGGEDCOM RS920W

Отзывы:

Похожие инструкции для RUGGEDCOM RS920W

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM RS920W, Руководство по установке

Результаты поиска

Содержание RUGGEDCOM RS920W

Отзывы:

Похожие инструкции для RUGGEDCOM RS920W

Бренды по названию

Популярные бренды