Siemens RUGGEDCOM RS900L Скачать руководство пользователя страница 44

Страница: 44 / 50

Certification

The RUGGEDCOM RS900L device has been thoroughly tested to guarantee its

conformance with recognized standards and has received approval from recognized

regulatory agencies.

6.1

Approvals

This section details the standards to which the RUGGEDCOM RS900L complies.

6.1.1

CSA

This device meets the requirements of the following Canadian Standards Association

(CSA) standards under certificate 1550963:
•

CAN/CSA-C22.2 No. 62368-1

Information Technology Equipment – Safety – Part 1: General Requirements (Bi-

National Standard, with UL 62368-1)

•

UL 62368-1

Information Technology Equipment – Safety Part 1: General Requirements

•

CAN/CSA-C22.2 No. 0-M91

General Requirements - Canadian Electrical Code, Part II

•

CAN/CSA-C22.2 No. 142-M1987

Process Control Equipment Industrial Products

•

CAN/CSA-C22.2 No. 213-16

Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class

III, Divisions 1 and 2 Hazardous (Classified) Locations (Bi-National Standard with

ANSI/ISA-12.12.01-2016)

•

UL 916

Standard for Energy Management Equipment

•

ANSI/ISA-12.12.01-2015

Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class

III, Division 1 and 2 Hazardous (Classified) Locations

It is specifically approved for use in hazardous locations with the following markings:
• Class I, Division 2, Groups A, B, C, D

RUGGEDCOM RS900L

Installation Manual, 04/2021, C79000-G8976-1027-09

Содержание RUGGEDCOM RS900L



















































Результаты поиска

Содержание RUGGEDCOM RS900L

Отзывы:

Похожие инструкции для RUGGEDCOM RS900L

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM RS900L, Руководство по установке

Результаты поиска

Содержание RUGGEDCOM RS900L

Отзывы:

Похожие инструкции для RUGGEDCOM RS900L

Бренды по названию

Популярные бренды