Siemens RUGGEDCOM RS416P, Руководство по установке, Страница: 41 / 54

RUGGEDCOM RS416P
Installation Guide
Chapter 5
Technical Specifications
Power Supply Specifications 31
Technical Specifications
This section provides important technical specifications related to the device and available modules.
CONTENTS
• Section 5.1, “Power Supply Specifications”
• Section 5.2, “PoE Power Supply Specifications”
• Section 5.3, “Failsafe Relay Specifications”
• Section 5.4, “Copper Ethernet Port Specifications”
• Section 5.5, “Fiber Optic Ethernet Port Specifications”
• Section 5.6, “Serial Port Specifications”
• Section 5.7, “IRIG-B Port Specifications”
• Section 5.8, “Operating Environment”
• Section 5.9, “Mechanical Specifications”
• Section 5.10, “Dimension Drawings”
Section 5.1
Power Supply Specifications
NOTE
For specifications on the PoE power supply, refer to Section 5.2, “PoE Power Supply Specifications” .
Input Range
Power Supply Type
Minimum Maximum
Internal Fuse
Rating
ab
Isolation
Maximum Power
Consumption
c
12 VDC
24 VDC
10 VDC 36 VDC 6.3 A(F)
48 VDC 36 VDC 59 VDC 3.15 A(T)
1.5 kVDC
HI (125/250 VDC)
d
88 VDC 300 VDC
HI (110/230 VAC)
d
85 VAC 264 VAC
2 A(T) 4 kVAC, 5.5 kVDC
25 W
a
(F) denotes fast-acting fuse
b
(T) denotes time-delay fuse.
c
Power consumption varies based on configuration. 10/100Base-TX ports consume roughly 1 W less than fiber optic ports.
d
The HI power supply is the same power supply for both AC and DC.