Siemens RUGGEDCOM RS416, Руководство по установке

Страница: 29 / 50

RUGGEDCOM RS416
Installation Guide
Chapter 3
Communication Ports
Serial Ports 21
2 1
Figure 20: MTRJ Port
1. Tx Connector 2. Rx Connector
2 1
Figure 21: LC Port
1. Tx Connector 2. Rx Connector
2 1
Figure 22: SC Port
1. Tx Connector 2. Rx Connector
2 1
Figure 23: ST Port
1. Tx Connector 2. Rx Connector
For specifications on the available fiber optic Ethernet ports, refer to Section 4.4, “Fiber Optic Ethernet Port
Specifications” .
Section 3.3
Serial Ports
The RS416 supports serial cards with fiber serial ST (Straight Tip) connectors, RS232/RS485/RS422 DB9 serial ports
or RS232/RS485/RS422 RJ45 serial ports.
Serial DB9 and RJ45 ports can be run in RS232, RS485 or RS422 mode. They can also be ordered with IRIG-B time
code support.
NOTE
On power-up, all serial RJ45 ports default to RS485 mode. Each port can be individually set to RS232,
RS485 or RS422 mode through ROS. For more information, refer to the ROS User Guide for the RS416.
NOTE
For information about how to connect devices configured to run in RS485 mode, refer to Section 3.5,
“Connecting Multiple RS485 Devices” .
All serial ports feature an LED that indicates the current state of the port.
State Description
Green Link activity detected
Off No link detected
For specifications on serial ports, refer to Section 4.5, “Serial Port Specifications” .
The following is the pin-out description for ST, DB9 and RJ45 serial ports: