Siemens RUGGEDCOM ROX II, Руководство пользователя

Страница: 728 / 798

Chapter 15
Network Discovery and Management
RUGGEDCOM ROX II
CLI User Guide
682 Adding an SNMP Group
GROUP MODEL LEVEL NAME NAME VIEW NAME
------------------------------------------------------------------------
initial any noAuthNoPriv all-of-mib all-of-mib all-of-mib
initial any authNoPriv all-of-mib all-of-mib all-of-mib
initial any authPriv all-of-mib all-of-mib all-of-mib
testgroup v2c noAuthNoPriv all-of-mib all-of-mib all-of-mib
all-rights any noAuthNoPriv all-of-mib all-of-mib all-of-mib
!
!
If no SNMP groups have been configured, add groups as needed. For more information, refer to Section 15.2.9.2,
“Adding an SNMP Group” .
Section 15.2.9.2
Adding an SNMP Group
To add an SNMP group, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the SNMP group by typing:
admin snmp snmp-access group model level
Where:
•
group
is the name of the group.
•
model
is the security model for the group. Options include:
any
,
v1
,
v2c
, or
v3
.
•
level
is the security level for the group. Options include:
▫
authPriv
– Communication with authentication and privacy.
▫ authNoPriv – Communication with authentication and without privacy.
▫
noAuthnoPriv
– Communication without authentication and privacy.
3. Configure the following parameter(s) as required:
Parameter Description
read-view-name { read-view-name } Synopsis: { no-view, v1-mib, restricted, all-of-mib }
Default: all-of-mib
The name of the read view to which the SNMP group has access: all-of-mib, restricted,
v1-mib, or no-view.
write-view-name { write-view-name } Synopsis: { no-view, v1-mib, restricted, all-of-mib }
Default: all-of-mib
The name of the write view to which the SNMP group has access: all-of-mib, restricted,
v1-mib, or no-view.
notify-view-name { notify-view-name } Synopsis: { no-view, v1-mib, restricted, all-of-mib }
Default: all-of-mib
The name of the notification view to which the SNMP group has access: all-of-mib,
restricted, v1-mib, or no-view.
4. Type commit and press Enter to save the changes, or type revert and press Enter to abort.