Introduction
1.2 Description
• LED indicators for link, activity, and speeds LED aids in field trouble-shooting
High Performance Ethernet Switching
• Full compliance with IEEE 802.3 and IEEE 802.3u Ethernet standards for
universal interoperability
• Non-blocking, store and forward switching with only 10 us latency means high
network throughput
• Full duplex operation results in no collisions and deterministic network response
and flow control via IEEE 802.3x pause frames results in no collisions or dropped
packet
1.2
Description
The RUGGEDCOM RMC41 features various ports, controls and indicator LEDs on
the display panel for connecting, configuring and troubleshooting the device. The
display panel can be located on the rear, front or top of the device, depending on the
mounting configuration.
6
4
3
5
1
2
1
POWER LED
2
Copper Ethernet Port with LEDs
3
Fiber Optic Ethernet Port (ST Port Shown)
4
LINK/ACT LED
5
Power Terminal Block
6
Chassis Ground Terminal
Figure 1.1
RUGGEDCOM RMC41
POWER LED
Illuminates when power is being supplied to the device.
State
Description
Green
Power is on
Off
Power is off
2
RUGGEDCOM RMC41
Installation Manual, 04/2021, C79000-G8976-1010-11
