Siemens RUGGEDCOM MX5000RE, Справочное руководство

Страница: 29 / 148

RUGGEDCOM NETCONF
Reference Guide
Chapter 2
NETCONF Capabilities and Namespaces
Vendor-Defined Capabilities 17
Section 2.2
Vendor-Defined Capabilities
The following capabilities are provided by the vendor of the development tools used to create the RUGGEDCOM
NETCONF software. These vendor-defined capabilities complement and extend the standard IETF capabilities.
Capabilities Description
<capability> http://tail-f.com/ns/netconf/with-defaults/1.0 </
capability>
This vendor-defined capability extends the standard IETF with-
defaults capability.
<capability> http://tail-f.com/ns/netconf/actions/1.0 </
capability>
This vendor-defined capability supports the execution of actions on
the device: you can issue direct commands through NETCONF, such
as reboot, clear-all-alarms, restore-factory-defaults, and others.
<capability> http://tail-f.com/ns/netconf/commit/1.0 </
capability>
This vendor-defined capability extends the commit capability: you
can make changes to a candidate configuration and commit the
changes to promote them to the running configuration.
<capability> http://tail-f.com/yang/common-monitoring?
module=tailf-common-monitoring&revision=2013-06-14
</
capability>
<capability>
http://tail-f.com/yang/confd-monitoring?
module=tailf-confd-monitoring&revision=2013-06-14 </
capability>
<capability>
http://tail-f.com/yang/netconf-monitoring?
module=tailf-netconf-monitoring&revision=2012-06-14 </
capability>
These vendor-defined capabilities support NETCONF monitoring on
the device.
Section 2.3
IETF Namespaces
NETCONF uses several namespaces to data types and configuration data models. Some namespaces are associated
with and provide support for specific NETCONF capabilities.
The following are the standard IETF namespaces supported by NETCONF:
Capabilities Description
<capability>urn:ietf:params:xml:ns:yang:ietf-inet-types?module=ietf-
inet-types&revision=2010-09-24</capability>
Defines data types for Internet addresses and related items.
For more information on this namespace, see
Internet Engineering
Task Force RFC 6021 [http://tools.ietf.org/html/rfc6021].
<capability>urn:ietf:params:xml:ns:yang:ietf-netconf-monitoring?
module=ietf-netconf-monitoring&revision=2010-10-04</capability>
Defines data types for NETCONF monitoring.
For more information on this namespace, see
Internet Engineering
Task Force RFC 6022 [http://tools.ietf.org/html/rfc6022].
<capability>urn:ietf:params:xml:ns:yang:ietf-yang-types?
module=ietf-yang-types&revision=2010-09-24</capability>
Defines data types for general YANG data types. YANG is the data
modeling language used to develop the RUGGEDCOM NETCONF
software.
For more information on this namespace, see
Internet Engineering
Task Force RFC 6022 [http://tools.ietf.org/html/rfc6022].
<capability>urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults?
revision=2010-11-11&module=ietf-with-defaults</capability>
Defines items used by the with-defaults capability.
For more information on this namespace, see
Internet Engineering
Task Force RFC 6243 [http://tools.ietf.org/html/rfc6243].