Communication Ports
4
The RUGGEDCOM M2100F can be equipped with various types of communication
ports to enhance its abilities and performance.
Module Assignment
1
3
5
7
9
10
2
4
6
8
Figure 4.1
Module Assignment
Each type of module has a specific location in the RUGGEDCOM M2100F chassis:
• Slot 5 supports a pair of Gigabit Ethernet (1 Gbps) ports
• Slot 6 supports a single Gigabit Ethernet (1 Gbps) port
• All other ports support any combination of fiber or copper Ethernet connectors
up to 100 Mbps
The exact configuration of the device can be determined by reading the factory da-
ta file through the RUGGEDCOM M2100F user interface. For more information about
how to read the factory data file, refer to the
RUGGEDCOM M2100F User Guide
for
the RUGGEDCOM M2100F.
Port LEDs
Each communication port is equipped with an LED that indicates the link/activity
state of the port.
1
LED State
Description
Yellow (Solid)
Link established
Yellow (Blinking)
Link activity
Off
No link detected
RUGGEDCOM M2100F
Installation Manual, 01/2020, C79000-G8976-1342-06
21
