Siemens RUGGEDCOM i803, Руководство по установке

Страница: 30 / 40

Technical Specifications
5
This section provides important technical specifications related to the device and
available modules.
5.1 Power Supply Specifications
Power
Supply Type
Minimum Input Maximum Input Internal
Fuse Rating
a
Maximum Power
Consumption
24 VDC 9 VDC 32 VDC 3A (T) 9 W
a
(T) denotes a time-delay fuse.
5.2 Failsafe Alarm Relay Specifications
Note
The following specifications are for Class-2 circuits only.
Maximum Switching Voltage Rated Switching Current Isolation
30 VDC 2 A, 60 W
125 VDC 0.24 A, 30 W
125 VAC 0.5 A, 62.5 W
220 VDC 0.24 A, 60 W
250 VAC 0.25 A, 62.5 W
1500 V
rms
for 1 minute
5.3 Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered
with the RUGGEDCOM i803.
Speed Connector Duplex
a
Cable
Type
b
Wiring
Standard
c
Maximum
Distance
d
Isolation
e
10/100Base-TX RJ45 FDX/HDX > Category
5
TIA/EIA
T568A/B
100 m
(328 ft)
1.5 kV
a
Auto-Negotiating
b
Shielded or unshielded.
c
Auto-crossover and auto-polarity.
d
Typical distance. Dependent on the number of connectors and splices.
e
RMS 1 minute.
RUGGEDCOM i803
Installation Manual, 04/2022, C79000-G8976-1005-07
21