Siemens RUGGEDCOM i803, Руководство по установке

Страница: 13 / 40

Introduction
1.4 Decommissioning and Disposal
1.4 Decommissioning and Disposal
Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated "Configuration Manual".
Recycling and Disposal
For environmentally friendly recycling and disposal of this device and related
accessories, contact a facility certified to dispose of waste electrical and electronic
equipment. Recycling and disposal must be done in accordance with local
regulations.
1.5 Supported Fiber Optic Cables
The following fiber optic cable types are supported under the stated conditions.
Distance (m) Cable Type Wavelength (nm) Modal Bandwidth
(MHz·km)
100Base-FX 1000Base-SX 10GBase-SR
850 200 — 275 33 OM1 (62.5/125)
1300 500 2000 — —
850 500 — 550 82 OM2 (50/125)
1300 500 2000 — —
850 1500 — 550 300 OM3 (50/125)
a
1300 500 2000 — —
850 3500 — 550 400 OM4 (50/125)
a
1300 500 2000 — —
a
Laser optimized.
4
RUGGEDCOM i803
Installation Manual, 04/2022, C79000-G8976-1005-07