Siemens RUGGEDCOM APE1402 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 36

Siemens RUGGEDCOM APE1402 Скачать руководство пользователя страница 11

Overview
1.2 Requirements and Restrictions

Module

Operating System

APE1404

Debian Linux®

APE1404 ADM

Debian Linux® + CROSSBOW ADM

APE1404W7

Windows® Embedded Standard 7

APE1404CKP

Check Point GAiA™

Upgrading or Changing the Operating System

The operating system can be upgraded or extended as needed. It can also be

changed to an alternative software platform, such as Linux Mint or Ubuntu.

IMPORTANT

Siemens assumes no responsibility for upgrades or changes made to the operating

system.

Other Software/Applications

Siemens does not support any software installed on the RUGGEDCOM APE. This in-

cludes, but is not limited to, software images provided by Siemens Customer Sup-

port.

Check Point GAiA™ Licensing

To run Check Point GAiA™ on the RUGGEDCOM APE, the Check Point operating sys-

tem must be activated after the RUGGEDCOM APE module has been installed.

1.2

Requirements and Restrictions

Note the following requirements and restrictions for using the RUGGEDCOM APE:
•

Operating Temperature Range

Each module is rated for operation within the temperature range of -40 to 75 °C

(-40 to 167 °F).

•

Power Consumption

CAUTION

Electrical hazard - risk of power failure

Installing more RUGGEDCOM APE modules than allowed on a RUGGEDCOM

RX15xx device can lead to power fluctuations and irregular shut downs.

On an RX1512 device, do not install more than one RUGGEDCOM APE module.
On an RX1500, RX1501, RX1510 or RX1511 device, do not install more than two

RUGGEDCOM APE modules.

2

RUGGEDCOM APE (Application Processing Engine)

Configuration Manual, 12/2019, C79000-G8976-1121-05

«
...
9
10
11
12
13
...
»

Содержание RUGGEDCOM APE1402





































Отзывы:

Нет отзывов