8 / 10
Siemens
Operating Instructions RMU7..B
CE1B3144_en
Building Technologies
Change daily heating / cooling periods
2015-03-31
Change daily heating / cooling periods
General
In the time switch program, you can set the daily heating
and cooling periods to suit your individual needs.
Each day can accommodate a maximum of 6 switching
points; a room setpoint is assigned to each time period.
In addition to the weekdays (Monday through Sunday), you
can program a special day, that is, a special 24-hour heating
and cooling program.
The special day is activated when you make an entry in
Holidays
.
Changes on the controller are possible only if the controller's
time switch defines the program.
If an external operator station controls the program, changes
can only be made from that station.
Observe the following prior to making entries:
·
First enter the start time for the heating/cooling phase and
then the room operating mode for the phase.
·
The following room operating modes
, , and are
available. Set the corresponding setpoints in menu
Controller 1 and Controller 2
(
page 7).
·
You can copy any 24-hour heating / cooling program to
other days.
Change and delete times and setpoints
1. Select the required day.
2. In the diagram, advance the pointer
to the time to be
changed.
3. Set the desired time.
Delete the time: Reset the time via
00:00
until
––:––
appears.
4. Select the desired operating mode.
5. If required, set additional times and select additional
setpoints.
Path:
Welcome > Main menu > Time switch... > ...
Enter additional switching points
1. Select the desired day.
2. In the diagram, advance pointer
to the
last
point in
time of the current program.
3. Turn the OK knob by one notch;
––:–– ––––––
appears.
4. Set the desired start time.
5. Set the desired room operating mode.
Copy a 24-hour heating / cooling program
1. Select the day to be copied.
2. Turn the OK knob clockwise until
Copy to:
appears.
3. Press the OK knob.
4. The menu for the day selection (week sections, individual
weekdays, special day) appears.
5. Select the desired weekday or week section.
6. Copy (press the OK knob).
Create a new 24-hour program
The controller is supplied with a 24-hour program for every
day (including special days). This means that you will never
have to create a new 24-hour program, but only change an
existing program.
Operating voltage off – heating / cooling program lost?
In the event of a power failure, the 24-hour programs
entered will be maintained, independent of the duration of
the power failure.
First, write down a 7-day schedule for daily switching times and operating modes – this will facilitate entry into the controller!
Holiday periods or special days
You can enter a total of 16 holiday periods and special days.
During a holiday period, there is no heating / cooling
program active, but only the same room operating mode. On
special day(s), the special day program is active.
Date
Enter on the submenus
Entry 1, Entry 2, Entry 3,
etc., the
holiday period or special day:
·
Operating line s
tart
:
Date, year and time of day for the start of holidays or
special day.
·
Operating line
end
:
Date, year and time of day for the end of holidays or
special day.
·
Operating line
reason
: Holidays or special day
Every entry can be cancelled:
·
Delete entry...
Room operating mode (for holidays).
Enter the desired room operating mode in the operating line
room operating mode holidays
.
The following choices are available:
·
Economy or
·
Protection
.
The entry will apply to all holiday periods.
Heating / cooling program (for special day)
Enter the heating / cooling program for the special days in
Time switch
.
The heating/cooling program applies to all special days.
Path:
Welcome > Main menu > Holidays/special days > Entry 1 > ...
Path:
Welcome > Main menu > Room operating mode > Room operating mode holidays > ...
Before making entries, prepare a yearly time schedule for all holiday periods!
