Siemens PCS 7 Скачать руководство пользователя страница 73

Страница: 73 / 156

5.4

Installing the PCS 7 software

5.4.1

Notes on installing PCS 7

Introduction

The PCS 7 software contains applications that allow you to configure systems and operate

and monitor them in runtime. In addition to the applications of the basic software, there are

numerous optional packages and upgrade packages that you can install later and use for

special applications.
Refer to the latest

ST PCS 7 catalog to learn about all of the software packages released for

PCS 7 and how they can be used. You can also find a detailed introduction in the

documentation

Process Control System PCS 7; Engineering System.

The following describes the installation for the basic PCS 7 software.

Versions of the software package

You can find information about versions of software packages which you can install from the

latest

Process Control System; SIMATIC PCS 7 DVD in the Process Control System PCS 7;

PCS 7 Readme file (see "Preface (Page 9)").

Latest information about the installation

Note
Please note the following:
● When installing PCS 7 in a network, make sure that at least one DVD drive and one diskette

drive are available.

● Read the latest information about installation and the software and hardware requirements

in the

Process control system PCS 7; PCS 7 Readme file (see "Preface (Page 9)").

● If you install PCS 7 in a domain, be aware of the group policies or other restrictions that

may hinder the installation. Consult the appropriate Administrator as regards these settings

and the required approvals and authorizations.

● If you want to use the Windows firewall, you must wait until PCS 7 is installed before

activating it.

Installing PC stations

5.4 Installing the PCS 7 software

PCS 7 - PC Configuration (V8.2)

Installation Manual, 03/2016, A5E36200050-AB

Содержание PCS 7





























































































































































Результаты поиска

Содержание PCS 7

Отзывы:

Похожие инструкции для PCS 7

Бренды по названию

Популярные бренды

Siemens PCS 7, Руководство по установке

Результаты поиска

Содержание PCS 7

Отзывы:

Похожие инструкции для PCS 7

Бренды по названию

Популярные бренды