background image

Advice for users

120

Advice for users

Care of the telephone

Use either a damp cloth or an antistatic cloth to clean the telephone. 
Never use a dry cloth!

If the telephone needs to be cleaned thoroughly, use a neutral, diluted, 
surface-active cleaning agent. Ensure that all traces of the cleaning 
agent are removed with a damp cloth (using water only!).

Never apply a cleaning agent that contains alcohol or that is liable to 
harm plastic surfaces; never use an abrasive cleaning powder.

Troubleshooting

There is no response after a key has been pressed:

Check whether the key has become stuck.

No ringing tone when an incoming call is received:

Check whether you have activated the Do Not Disturb function 

page 79. 

If you have, cancel this function to receive calls again.

You cannot dial a number:

Check whether you have locked the telephone 

page 81. If you have, un-

lock the telephone to make calls again.

The time shown on the display is not correct:

After 24 hours at the latest, the time is corrected automatically (overnight).

All other faults:

First contact the service personnel. If the fault cannot be 
eliminated, Customer Service must be called in.

Содержание optiPoint410economy































































































































Отзывы: