background image

OpenAir Non-Spring Return Rotary Electric Damper Actuator 

Technical Instructions 

24 Vac Floating Control 

Document No. 155-188P25 

 

December 26, 2007 

Siemens Building Technologies, Inc. 

 

 

Page 3

 

 

 

Specifications, Continued 

Ambient 
conditions 

Ambient temperature 
  

operation 

-25°F to 130°F (-32°C to 55°C) 

  

storage and transport 

-40°F to 158°F (-40°C to 70°C) 

Ambient humidity (non-condensing) 

95% RH 

Agency 
certification 

 

 

 

UL listed to UL873 

 

 

 

cUL certified to Canadian Standard  

   

C22.2 

No. 

24-93 

 Conformity 

 for Plenum 
Models 

In accordance with the directive set forth by the European Union for  

Electromagnetic Compatibility (EMC)  

89/336/EEC 

Emissions standards 

EN 50081-1 

Immunity standards 

EN 50082-2 

Miscellaneous 

Pre-cabled connection  

18 AWG  

Standard cable length 

3 feet (0.9m) 

 

Life cycle: 

Designed for over 60,000 full strokes and 

 

 

 

a minimum of 1.5 million repositions at  

   

rated 

torque 

and 

temperature 

 

Dimensions 

6.2" L × 2.8" W × 2.4" D× 2.4" D 

 

 

 

(157 mm L × 71 mm W × 61 mm D) 

Weight   

1.06 lb. (0.48 kg) 

Accessories 

NOTE: 

Neither the auxiliary switches nor feedback potentiometer can be added in 
the field. Order the product number that includes these options.  
See Table 1. 

 
 

EA0695R1

Figure 2.  

Rotary to Linear.

 

ASK71.5 

Allows a direct-coupled actuator to 

provide an auxiliary linear drive.

 

 

Ea0696R1

 

Figure 3.  

Rotary to Linear  

with Bracket. 

ASK71.6 

Allows economical mounting of an OpenAir 

actuator to a variety of surfaces. Should be used in 
applications where the actuator can be rigid-surface 
mounted and a linear stroke output is needed.

 

 

EA0647R1

 

Figure 4.  

Conduit Adapter. 

ASK76.1U 

Provides the connection between the 

actuator and conduit. 

NOTE: 

GDE131.1T and GDE131.1N are not 
compatible with the ASK76.1U. 

Содержание OpenAir GDE Series

















Отзывы: