manualshive.com logo in svg

Siemens NCM S7, Руководство пользователя, Страница: 130 / 222

Поделиться
Скачать
Siemens NCM S7 Скачать руководство пользователя страница 130

Configuring Communication Connections

130

SIMATIC NET NCM S7 for Industrial Ethernet

C79000-G8976-C129–06

Attributes

Description

Access

Local Endpoint

ID

The entry is identical to the Local ID parameter in the
connection list.

Selectable

Name

When you create the connection, a name is proposed here
along with a connection number as suffix.

With unspecified connections, use this box to identify the
partner.

Modifiable

Via CP

If the station contains more than one CP of the same type
connected to the same subnet, you can select the connection
route –> “Route”, see Section 4.8.

If no CP is assigned (for example because the CP has been
deleted) “none” is displayed here.

Display only

Block Parameters

ID

This value must be entered as a block call parameter ID for
calling the FC  in the user program to identify the connection.
The ID changes if the local ID is changed.

Display only

LADDR

This value must be entered as a block call parameter ID for
calling the FC  in the user program to identify the connection.

Display only

Connection Name (Reference) – Only in Multiproject

If you create a connection to a partner in another project, that has not yet been
merged with the current multiproject, you must enter a connection name as
reference. Interproject connections can then be joined up based on this reference.
As soon as the connections have been brought together, the connection name
(reference) can no longer be entered.

Содержание NCM S7































































































































































































































Отзывы:

Нет отзывов