Procedure
2.1 Updating Firmware
Performing a firmware update on MultiRanger 200 HMI
6
Application examples, 09\2020, AG061215
7.
Click
Begin
to start the firmware downloader.
8.
You will then see the communications options dialog box. Please choose the following
options:
–
Set slave address to 1 for sensor board, or 2 for HMI.
–
Set the com port to PC.
–
Set the baud rate to 115200.
–
Set other communications to 8 data bits, no parity, and 1 stop bit.
9.
Click
Next
.
10.Click
Start
to begin the download.
11.Once the download is complete, the following window will appear. Click
OK
.
