Siemens MT8001 MP4.20 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 68

Siemens MT8001 MP4.20 Скачать руководство пользователя страница 47

Configuring the MT8001

47

Building Technologies

048_DMS_MT8001_ICC_MP4.20_A6V10096181_a_en.doc

Fire Safety & Security Products

06.2009

5.4.6

Defining report actions

The actions that you define here will display (in a selection list) on the report page
of all events. The end user can then compile his report by selecting the actions that
he or she followed.

The customer should provide a list of these actions. Each action should be no
more than 36 characters (out of a maximum of 50) for an optimal view in the
MT8001 report list pane.

To define an action, do the following:

1.

Select MT8001

Æ

Event browser

Æ

Report Table nodes.

2.

Click the report icon

to insert a new report action.

3.

Expand the

Report Table

node and select the

Node

tab.

4.

Select the new report node.

5.

Enter the report action in the

Description

and

Report Text

fields (see Fig. 45).

Fig. 45 Enter Report Text

Note:

The Filter is not supported in this version of the MT8001. Do not include the

filter in this configuration.

«
...
45
46
47
48
49
...
»

Содержание MT8001 MP4.20





































































Отзывы:

Нет отзывов