Siemens MT8001 MP4.20 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 68

Siemens MT8001 MP4.20 Скачать руководство пользователя страница 46

Configuring the MT8001

46

Building Technologies

048_DMS_MT8001_ICC_MP4.20_A6V10096181_a_en.doc

Fire Safety & Security Products

06.2009

5.4.5

Disabling events from being triggered

Each data-point has a number of possible states that can trigger events. The de-
fault setting for most of these states is “enabled”. However, you may want to pre-
vent event triggering for certain types of states.

To disable event triggering, do the following:

1.

Select the data-point that should have event(s) disabled.

2.

Select the state for which you want to disable event triggering in the

Field Point

Data

tab (click the number in the LPID field to select the state, see Fig. 44, “A”).

3.

Click the

Event enabled

box to remove the “X” and disable event triggering for

that state. (See Fig. 44, “B”.)

Fig. 44 Disable event triggering

A

Select the state.

B

Disable the event from being triggered when the device
goes into this state.

A

B

«
...
44
45
46
47
48
...
»

Содержание MT8001 MP4.20





































































Отзывы:

Нет отзывов