Siemens MOBY ES030-K Скачать руководство пользователя страница 91

Страница: 91 / 100

6AW5451-6XX01-1K

ES 030-K Manual

Subject to change without prior notice

9 - 3

RD: 08.2000
(4)J31069-D0136-U001-A0-7618

Detailed Description of the Batch Calls

ESCOPY 1 0 ES@@@@ST.S5D

The ES 030 user memory will be erased completely. ESCOPY

transfers the file ES@@@@ST.S5D from the current

MS-DOS directory via COM1 to the ES 030.

ESCOPY 1 1 DATEN.DAT

ESCOPY reads the ES 030 user memory via COM1 and stores

the contents in the file DATEN.DAT in the current MS-DOS

directory. Editing the data using the STEP5 programming

package is not possible.

ESCOPY 1 2

ESCOPY reads the bookkeeper of the ES 030 user program

via COM1 and displays it on the screen. The screen output has

the following format:

ADDRESS BLOCK TYPE NUMBER LENGTH

ESCOPY 1 3

ESCOPY erases the complete ES 030 user memory

ESCOPY 1 4 20

ESCOPY reads the specified data block (DB20 in this case) out

of the

ES 030 RAM

and displays it on the screen. Only data

blocks DB1 to DB119 can be read and displayed. The screen

display will be in KH (hexadecimal), KS (character), and KF

(fixed-point number).

Remember:

The displayed data block is valid only if

“

download" operation has been selected

using the function key E2H (see also

Chapter 9.2).

ESCOPY 1 F

ESCOPY resets the ES 030 and starts the user program.

All ESCOPY batch calls can, of course, be combined into

a program in an MS-DOS batch file.

Example of an MS-DOS Batch File TRANSMIT.BAT

Creation of an S5 file MOBY@@ST.S5D in STEP5. This file is to

be stored on drive A under User=5.

TRANSMIT.BAT

PCOPY 5A: MOBY@@ST.S5D

(Transferring the S5 block from drive A, User=5 to the

current MS-DOS directory)

ESCOPY 1 0 MOBY@@ST.S5D

(Transferring the S5 file via COM1 to the ES 030)

ESCOPY 1 2

(Read ES 030 bookkeeper via COM1)

ESCOPY 1 F

(Resetting the ES 030 via COM1 and starting the user

program MOBY@@ST.S5D. The ES 030 performs a system

start.)

9.3.2

Dialogue Operation

The input ESCOPY <RET> calls up the dialogue operation. A

mask will appear on the PC screen. Using the arrow keys

“

individual functions can be selected.

INTERFACE

Move the selection window to

“

INTERFACE" and press the

<RET> enter key. This function will select the serial interface

COM1 or COM2. Via the selected interface, the user must con

nect the ES 030 with the computer (V.24 cable).

By entering

“

1" for COM1 or

“

2" for COM2, the corresponding

interface will be selected. If an illegal interface number is en

tered, an error message will be generated.

The current selection will stay valid for the whole session. The

default selection upon switching on the computer is COM1 (if

the file ESCOPY.BUP does not exist, also see Chapter 9.4).

Note:

The selected interface will be displayed in the

lower right corner of the screen.

COPYING TO THE ES 030

Move the selection window to

“

COPY TO THE ES 030" and en

ter <RET>.

This function serves to transfer an S5 file stored under MS-

DOS to the ES 030. The ES 030 user memory will be completely

erased prior to this.

The corresponding S5 file may already be stored under MS-

DOS, or it may have to be copied from the PCP/M partition into

the MS-DOS working directory.

S5 file already under DOS (y/n)?

Computer prompt:

- After entering

“

y", the computer will ask for the respective

file name. Enter the file name and press <RET>. ESCOPY

will automatically add the PCP/M extension

“

ST.S5D" to

the file name and transfer the file via the selected interface

to the ES 030. If the specified S5 file does not exist in the

current working directory, an error message will be gener

ated.

Note:

The S5 file

must

be stored in the MS-DOS

working directory.

No drive specifications or

path specifications are allowed.

By entering

“

n", ESCOPY will open a window and ask for

- the user area (0 ... 15) of the respective S5 file under

PCP/M

- the drive number of the S5 file under PCP/M. The

user must ensure that a diskette is in the drive that has

been selected.

- the S5 file name. The file name will have, correspon

ding to STEP5 convention, the PCP/M extension

“

ST.S5D" added.

With the help of the parameters that the computer has asked

for, ESCOPY will now call up PCOPY as Child process, and

copy the specified file from the PCP/M partition into the

working directory under MS-DOS. A file under MS-DOS

which already has the same name, will be re-named and

given the extension

“

.OLD" (backup). An error message will be

generated if the specified file does not exist in the working di

rectory under MS-DOS after PCOPY has been executed. The

user should again make sure that the parameters entered are

correct.

On an error-free execution of the PCOPY call, ESCOPY will

transfer the parameterized file via the selected interface to the

ES 030.

Содержание MOBY ES030-K





































































































Результаты поиска

Содержание MOBY ES030-K

Отзывы:

Siemens MOBY ES030-K, Руководство пользователя, Страница: 91 / 100

Результаты поиска

Содержание MOBY ES030-K

Отзывы: