Configuring the MK8000
51
Building Technologies
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
Fire Safety & Security Products
06.2010
Adding the network drivers
On the MK8000 Stand-Alone station, do the following:
1.
Select
MK8000 system
Physical Configuration
Stand-Alone station
.
The serial Channel is defined by default.
2.
If necessary, add the
Video Network Manager
and/or the
SiPass Driver
by
clicking the corresponding icons on the left (Fig. 46).
Fig. 46 Selecting Video Network Manager (A), the SiPass Driver (B) and the OP
Driver (C, not available in MK8000)
3.
Select the serial Channel node (by default ‘Channel’)
4.
Add the required drivers by clicking the corresponding icon on the left (Fig. 47).
Fig. 47 Adding communication drivers:
(A) NS8010 Cerloop/ISO1745
(B) NS8012 CDI-Net
(C) NS8210 NK8000
(D) NS8015 CNDL
(E), NS8014 SI410
(F), NS8011 BACnet
(F), NS8013 SPC
On the MK8000 FEP station you can also add serial drivers as described above
and then connect them (drag & drop) to the Channel node of the Stand-Alone sta-
tion (Fig. 48).
