Siemens Milltronics L-300, Инструкция по эксплуатации

Страница: 15 / 24

7ML19985EQ01 Milltronics L-300 – INSTRUCTION MANUAL Page 11
In-Feed/Discharge Air Pressure
L-300 Outline and Details
Flowmeter Details
Flowmeter details are continued on the next page.
• If a material in-feed/discharge differential air
pressure is anticipated and rotary airlock
feeders are not used, vent the in-feed and
discharge chutes to a common dust collector.
• Install a tuning gate in each vent to balance the
air pressure.
• If a dust collector is not used, install an air
bypass chute between the flowmeter in-feed
and discharge chutes.
To common
dust collector
Flowguide with gasket
hex head bolt M12-
1.75 x 25 (12)
lockwasher ø12 (12)
enclosure with doors
and hardware
connectors
load cell leads
load cell labels (2)
conduit (2 m)
latch (TYP)
hinge (TYP)
housing (cabinet)