5/13
Building Technologies Division
CC1N7130en
Infrastructure & Cities Sector
22.08.2013
Ordering
Oil burner control
(without plug-in base)
refer to «Type summary»
Connection accessories for small burner controls
refer to Data Sheet N7201
-
Plug-in base AGK11...
-
Cable holders AGK65..., AGK66
Flame detectors
-
Photo resistive detectors QRB1...
refer to Data Sheet N7714
-
Blue-flame detectors QRC1...
refer to Data Sheet N7716
Interface OCI400
refer to Data Sheet N7614
Interface between burner control and PC
Facilitates viewing and recording setting parameters on site in connection with the
ACS400 / ACS410 PC software
PC software ACS400
refer to User Documentation J7350
PC software for visualizing the burner controls
PC software ACS410
refer to User Documentation J7352
PC software for setting the parameters and for visualizing the burner controls
Demo case KF8891
refer to User Manual B7989
-
For demonstrating the functions of burner controls
Test adapter KF8885
refer to Operating Instructions B7986
-
For checking the functions of burner controls on the burner
-
With switch for manual startup of the burner
-
With switch for simulating the oil preheater’s release contact
-
With 2 pairs of jacks for measuring the flame detector current
Test adapter KF8833
-
For checking the functions of burner controls on the burner
-
With signal lamps for program indication
-
With one pair of jacks for measuring the flame detector current
Test adapter KF8840
-
For checking the functions of burner controls on the burner
-
With signal lamps for program indication
-
With on / off switch for simulating the flame signal
-
With holes for checking the control voltages at the tabs of the burner control
-
With one pair of jacks for measuring the flame detector’s resistance
Extension of lockout reset button
-
Extension 19 mm:
AGK20.19
-
Extension 43 mm:
AGK20.43
-
Extension 55 mm:
AGK20.55
