en
Cleaning and maintenance
12
3.
Now close one of the fan flaps, slightly lift it out of
the holder at the front and then slide it out towards
you. Repeat the process with the other fan flap.
Caution!
Risk of damage when lifting out and setting down
the fan flaps.Pull the fan flaps up to remove them
and make sure that you do not scratch the surfaces
of the appliance.
4.
Once the fan flaps and filter have been removed,
clean the inside of the appliance.
5.
Once you have finished cleaning the appliance, refit
the fan flaps and the magnetic strip and insert the
metal grease filter.
Cleaning the metal mesh grease filters
Notes
■
Do not use any aggressive, acidic or alkaline
cleaning agents.
■
When cleaning the metal mesh grease filters, also
clean the holder for the metal mesh grease filters in
the appliance using a damp cloth.
■
The metal mesh grease filters can be cleaned in the
dishwasher or by hand.
By hand:
Note:
You can use a special grease solvent for
stubborn dirt. It can be ordered via the Online Shop.
■
Soak the metal mesh grease filters in a hot soapy
solution.
■
Clean the filters with a brush and then rinse them
thoroughly.
■
Leave the metal mesh grease filters to drain.
In the dishwasher:
Note:
Slight discolouration may occur if the metal
grease filters are cleaned in the dishwasher. This has
no effect on the performance of the metal grease filters.
■
Do not clean heavily soiled metal grease filters
together with cookware.
■
Place the metal grease filters in the dishwasher,
leaving plenty of space around them. The metal
grease filters must not be wedged in.
■
Place the metal grease filters in the dishwasher with
the opening facing down.
■
Wash the fan flaps and gas deflector by hand, and
not in the dishwasher.
Installing the metal mesh grease filter
Position the metal grease filter correctly and insert it.
Note:
Place the filter into the groove.
Replacing or regenerating the activated charcoal
filters
Activated charcoal filters trap the odour-causing
compounds in cooking smells. They are only used for
circulating-air mode.
Notes
■
The air recirculation module and activated charcoal
filters are not included with the appliance. The air
recirculation module and activated charcoal filters
are available from specialist retailers, from our after-
sales service or from our online shop.
■
Only use genuine replacement filters. This will
ensure that the appliance performs optimally.
■
Refer to the printed supplement for information
about the regenerability of the activated charcoal
filters and about replacing them.
Resetting the saturation displays
Once you have cleaned or replaced the relevant filters,
reset the saturation indicator so that the symbols go
out.
Press and hold the
A
button until
‰
flashes three times
on the display panel.The saturation indicators for the
metal grease filter and the activated charcoal filter have
now been reset.
