Installing Power Pole Modules
N.O. Power Pole Installation
Class LC Electrically Held Lighting Contactor
(Convertible to Mechanically Held)
Catalog numbers LCE00C*
Page 2 of 6
Install the power pole module by sliding
foot into slot from the N.O. indicator side.
Pull clip, position power pole module onto
the base, and release.
1
2
Install the power pole module by sliding
foot into slot from the N.C. indicator side.
Pull clip, position power pole module onto
the base, and release.
1
2
1
2
N.F.
1
2
N.O.
N.C. Power Pole Installation
Removing the Power Pole Modules
Remove power pole module by inserting
screwdriver into the plastic clip and pull it out to
release the power pole module from the base.
1
1
Auxiliary Contact Block Installation
Insert one end of auxiliary contact module.
Snap opposite end in place.
1
1
2
N.F.
N.O.
2
Auxiliary Contact Block Removal
Slide flat screwdriver into clip of auxiliary
contact module and lift.
1
1
Siemens Industry, Inc.
A5E31166555A-001
