en
Operating the appliance
8
Control panel model 2
Setting the fan
Switching on
■
Touch the
#
symbol.
The fan starts at setting
ƒ
.
■
Touch the + or - symbol to alter the fan speed.
Switching off
Touch the
#
symbol.
Lighting
The lighting can be switched on and off independently
of the fan.
Touch the
=
symbol.
Setting the brightness
Press and hold the
=
symbol until the desired
brightness is reached.
Intensive setting
You can use the intensive setting if there is a large
build-up of odours and fumes/vapours.
Switching on
Touch the
@
symbol until
2
is shown on the display
panel.
Note:
After approx. 6 minutes, the extractor hood
automatically switches back to fan setting 3.
Switching off
If you want to end intensive mode before the preset
time expires, touch the
A
symbol to select the fan
setting you require.
Boost function
Switching on
Touch the
&
symbol.
Note:
After approximately 20 seconds, the extractor
hood automatically switches back to the fan setting that
was set beforehand.
Switching off
If you want to end the Boost function before the preset
time expires, touch the
&
symbol.
powerBoost position
On some appliances, the glass front can be adjusted to
an intermediate position (powerBoost position). The
powerBoost position can be used for eliminating
particularly strong cooking smells and large amounts of
steam.
Take hold of the glass front in the centre and open it
carefully.
Fan run-on time
Switching on
Touch the
A
symbol until
x
lights up on the display
panel.
The fan will run at fan setting 1.
After approximately 10 minutes, the fan will switch itself
off automatically.
Switching off
Touch the
@
symbol.
This immediately stops fan run-on.
Symbol
Explanation
#
Fan on/off
=
Light on/off/dimming
A
Reduce fan setting/fan run-on
@
Increase fan setting
&
Intensive mode
i
emotionLight Pro
Indicator/
symbol
Explanation
!
Metal grease filter saturation indicator
"
Activated charcoal filter saturation indicator
1-3
Fan settings
x
Fan run-on
2
Intensive mode
