Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Operating the appliance
en
9
Control panel model 2
Setting the fan
Switching on
Touch the
#
symbol.
The fan will start at fan setting 2.
Choosing the fan setting
Touch the
@
or
A
symbol to select a different fan
setting.
The fan setting that is selected will be shown on the
display panel.
Switching off
Touch the
#
symbol.
Lighting
The lighting can be switched on and off independently
of the fan.
Touch the
=
symbol.
Setting the brightness
Press and hold the
=
symbol until the required
brightness is reached.
Intensive setting
You can use the intensive setting if there is a large
build-up of odours and fumes/vapours.
Switching on
Touch the
@
symbol until
2
lights up on the display
panel.
Note:
After approx. 6 minutes, the extractor hood
automatically switches back to fan setting 3.
Switching off
To end intensive mode before the preset time expires,
touch the
A
symbol and select the fan setting you
require.
Boost function
Switching on
Touch the
&
symbol.
Note:
After around 20 seconds, the extractor hood will
automatically switch back to the fan setting that was set
beforehand.
Switching off
To end the Boost function before the preset time
expires, touch the
&
symbol.
Fan run-on time
Switching on
Touch the
x
symbol.
x
will light up on the display
panel.
The fan will run at fan setting 1.
The fan will switch off automatically after approximately
10 minutes.
Switching off
Touch the
@
symbol.
This immediately stops the fan run-on.
Symbol
Explanation
#
Fan on/off
=
Light on/off/dimming
A
Decrease fan setting/fan run-on
@
Increase fan setting
&
Intensive mode
x
Run-on
Indicator/
symbol
Explanation
!
Metal grease filter saturation indicator
"
Activated charcoal filter saturation indicator
1-3
Fan settings
x
Fan run-on
2
Intensive mode
&
Boost function
x
Run-on
D
Home Connect
