The most effective method of removing
vapours produced during cooking is to:
Switch the ventilator ON
as soon as you begin cooking.
Switch the ventilator OFF
a few minutes after you have finished
cooking.
Acoustic signal:
When a button is pressed, this is verified by
an acoustic signal.
Switching off the acoustic signal:
Simultaneously press buttons
0
and
+
until
a signal is emitted after approx. 3 seconds.
Switching on the acoustic signal:
Repeat the process.
Switching the fan ON
Press the
+
button
Setting the required fan speed:
Press the
+ button.
The fan speed is
increased by one step.
Press the
button.
The fan speed is reduced by one step.
Switching the fan OFF:
Press the
0
button.The displayed
0
goes
out shortly afterwards.
Or:
Keep pressing the
button until the fan
switches off.
The displayed
0
goes out shortly afterwards.
Intensive setting:
Maximum power is obtained at the intensi-
ve setting. It is only required for short
intervals.
Keep pressing the
+
button until a
P
appears
in the display.
If the intensive setting is not cancelled by
hand, the fan will automatically switch back
to step
2
after 10 minutes.
Fan follow-on:
Press the
button.
The fan runs for 10 minutes at setting
1.
At the same time the
display comes on.
Then the fan switches off automatically.
Lighting:
Briefly press the
button to switch the light
on and off.
The light can be switched on at any time,
even though the fan is switched off.
Adjusting the brightness:
Hold down the
button until the desired brightness is
obtained.
Switching on the light automatically, e.g.
via a timer:
Fan and light must be switched off.
Switching on:
Simultaneously
press the
and
buttons.
After approx. 3 seconds the light switches
on to acknowledge the setting.
Switching off:
Repeat the process with the light switched
on.
After approx. 3 seconds the light
switches off to acknowledge the setting.
Operating procedure
en
