Siemens LC 85 K 950, Инструкции по эксплуатации и монтажу

Страница: 20 / 88

Cleaning and care
Isolate the extractor hood by pulling out
the mains plug or switching off the fuse.
Do not clean the extractor hood with abrasive
sponges or with cleaning agents which
contain sand, soda, acid or chlorine!
Clean the extractor hood with a hot soap
solution or a mild window cleaner.
Do not scrape off dried-on dirt but wipe off
with a damp cloth.
When cleaning the grease filters, remove
grease deposits from accessible parts of
the housing. This prevents the risk of fire
and ensures that the extractor hood
continues operating at maximum efficiency.
Note:
Do not use alcohol (spirit) on plastic
surfaces, as dull marks may appear.
Caution:
Ensure that the kitchen is ade-
quately ventilated. Avoid naked flames!
Clean the operating buttons with a mild
soapy solution and a soft, damp cloth only.
Do not use stainless-steel cleaner to clean
the operating buttons.
Stainless steel surfaces:
Use a mild non-abrasive stainless steel
cleaner.
Clean the surface in the same direction as
it has been ground and polished.
We recommend our stainless steel cleaner
no. 461731. See enclosed service booklet
for order address.
Aluminium and plastic surfaces:
Do not use dry cloths.
Use a mild window cleaning agent.
Do not use aggressive, acidic or caustic
cleaners.
Replacing the light bulbs
1. Switch off the extractor hood and pull
out the mains plug or switch off the
electricity supply at the fuse box.
2. First remove the grease filter (see chapter
Grease Filter and Maintenance)
3. Unscrew the grease filter frame by
loosening the lens-head screws using
the enclosed Allen key. Take particular
care when loosening the last screw as
the grease filter frame could fall down
onto the hob.
4. Replace the defective illuminant (Osram
Dulux S 11W) be carefully pulling it out of
the holder. Please only use the hood with
an illuminant inserted.
1
1
1
1
2
3
3
3
3
5. Now insert the filter frame again and
tighten the 4 cheese-head screws using
the Allen key.
6. Restore the power by inserting the mains
plug or switching on the fuse.
en