Siemens KFV, Руководство по эксплуатации, Страница: 4 / 18

02.2019 4/18 H47.ELEKS005EN-00
Electromechanical systems
Operating instructions
A-opener 2.1
1 Introduction
1.1 Manufacturer and Service
KFV Karl Fliether GmbH & Co. KG
A company of the SIEGENIA GROUP
Siemensstraße 10
42551 Velbert
E-Mail: info@kfv.de
1.2 Target group of this documentation
This documentation is intended for use by end users.
In order to guarantee the safe use of the A-opener and
to prevent malfunction or damage, please read these
operating instructions carefully and completely and ob -
serve the instructions specified in the chapter "Safety"
in particular.
1.3 Intended use
• The AS3500/3600 multi-point lock with A-opener
2.1 is a special lock for locking and unlocking doors
automatically.
• The AS3500/3600 multi-point lock with A-opener
2.1 is suitable for installation in timber, aluminium,
steel and PVC entry doors for residential and public
buildings.
• All assembly and electrical installation work must be
carried out according to our assembly and instal -
lation instructions. Wiring the unit incorrectly can
irreparably damage its electronic components.
• The AS 3500/3600 multi-point lock with A-opener
2.1 may only be used
– with cylinder locks with free-running catches in
which the catch can always be freely turned
– with cylinder locks with a rigid catch in which
the catch is locked in a key withdrawal position
inside the range of – 30° to + 30°.
• The AS3500/3600 multi-point lock with A-opener
2.1 can be connected to an external access control
system via a voltage-free contact - switching time:
min. 1 second.
• Use the AS3500/3600 multi-point lock with A-opener
2.1 only when it is in a technically sound condition.
Do not modify the unit's components in any way.
• Use the AS3500/3600 multi-point lock with A-opener
2.1 only with original KFV accessories.
1.3.1 Locking part and hardware
• The use of any additional devices to keep the door
closed (with the exception of a door closer) is not
permitted. If a door closer is installed, it must not
impede operation of the door by children, the elder -
ly or infirm.
• Repair of the AS3500/3600 multi-point lock with
A-opener 2.1 is not permissible. If the AS3500/3500
multi-point lock with A-opener 2.1 is damaged, it
must be replaced by KFV or repaired by a service
agent authorised by KFV.
• Only KFV frame parts with Q adjustment may be
used.
1.3.2 Transport
• Always transport the door leaf in a vertical position.
• Do not carry the door by the lever handle or hard -
ware when transporting it.
1.3.3 Opening/Closing/Locking
• It must be possible to open and close the door easily.
A protruding latch and /or deadbolt must not impe -
de the opening and closing of the door.
• The locking elements must always engage freely in
the lock striker of the frame parts.
• If the locking elements do not retract easily, adjust
the penetrations of the frame parts and the AT-piece.
1.4 Improper use
• The AS3500/3600 multi-point lock with A-opener 2.1
must not be used for escape doors!
• The AS3500/3600 multi-point lock with A-opener
2.1 is not designed to accommodate changes to its
shape or seal which arise as a result of differences in
temperature or changes to the building.
• The AS3500/3600 multi-point lock with A-opener 2.1
must not be used in doors for wet rooms or rooms
in which the air contains aggressive or corrosive
components.
• Foreign objects and/or materials which impede or
prevent proper use must not be placed within the
opening range, the locking system or the striker
plates.
• If the AS 3500/3600 has been locked via the profi -
le cylinder, the main deadbolt is extended and the
lever handle is therefore blocked (child-proof lock).
An electric opening process may not be carried out
in this case.
• Do not interfere with and/or make any modifications
to the multi-point lock.
• Locking elements must not be misused to hold the
door open.
• Movable or adjustable locking pieces (e.g. deadbolt,
latch) must not be painted over.
1.5 Maintenance and service notes
• Check that all moving components are functioning
properly once a year. Check tightness of screwing.
• All components of the multi-point lock have alrea -
dy been treated with long-term lubrication and are
consequently maintenance-free. However, if a subse -
quent lubrication should be necessary, use only fully
synthetic, resin-free spray-on grease.