32
SIEMENS
Trouble shooting
Problem
Probable cause
Solution
The iron does not
heat up.
1. The “startStop Control”
function has been
activated. The iron is
set to stand-by.
1. Grip the handle of the iron
to re-start it.
“startStop Control”
indicator lamp (2)
flashes.
1. The “startStop Control”
function has been
activated. The iron is
set to stand-by.
1. Grip the handle of the iron
to re-start it.
Programme
indicator lamp (1)
flashes.
1. The soleplate (12) is
heating up or cooling
down to the selected
temperature.
1. This is normal and lights
will stop flashing when
the selected temperature
is reached.
The clothes tend to
stick.
1. The temperature of the
soleplate (12) is too
high.
1. Select a lower
temperature and wait until
the iron has cooled down.
Water drips out of
the soleplate when
using the “shot of
steam” function.
1. You have pressed the
shot of steam button
(7) repeatedly without
waiting for 5 seconds
between each press.
2. The temperature is too
low.
1. Wait 5 seconds between
each press of the shot of
steam button.
2. Set the temperature to
“max”.
Water drips out of
the soleplate (12)
together with
steam.
1. Temperature of the
soleplate (12) is too
low.
2. Steam regulator (5) is
set too high in
conjunction with a low
temperature.
1. Set the temperature to a
higher setting and wait
until the programme
indicator lamp (2) remains
lit continuously.
2. Set the steam regulator
(5) to a lower setting.
EN
g
LISH
