GAMMA
instabus
Technical Product Information
December 2014
IP Control Center N152
5WG1 152-1AB01
Technical Manual
N 152, 4 Pages
Siemens AG
Infrastructure & Cities Sector, Building Technologies
Update: http://www.siemens.com/gamma
ã
Siemens AG 2014
Control Products and Systems
Subject to change without further notice.
P. O. Box 10 09 53, D-93009 Regensburg
2.11.1.15/4
terminal contacts each. Take care not to damage the
two test sockets (Figure 3, D2.3) by accidentally con-
necting them to the bus cable or with the screw-driver
(e.g. when attempting to unplug the bus connection
block).
-
Carefully put the screw-driver to the wire-inserting slit
of the bus connection block's grey component and
pull the bus connection block (Figure 3, D2) from the
device (Figure 3, D1).
Slipping on bus connection blocks (Figure 3)
-
Slip the bus connection block onto the guide slot and
press the bus connection block (Figure 3, D2) down to
the stop.
Connecting bus cables (Figure 3)
-
The bus connection block (Figure 3, D2) can be used
with single core conductors Ø 0,6 ... 0,8 mm.
-
Remove approx. 5 mm of insulation from the conduc-
tor (Figure 3, D2.4) and plug it into the bus connection
block (Figure 3, D2) (red = +, black = -).
Disconnecting bus cables (Figure 3)
-
Unplug the bus connection block (Figure 3, D2) and
remove the bus cable conductor (Figure 3, D2.4) while
simultaneously wiggling it.
D2
D
D2
D2.4
5 mm
D2
D2.4
D2.1 D2.2
D2
D2.3
Figure 3: Connecting and disconnecting the bus wires
Slipping off / on auxiliary power connection block
-
Follow the instructions for the bus connection block
when slipping off/on the auxiliary power connection
block.
Dimension Diagram
Dimensions in mm
b
9
0
44
55
4
5
b = 4 SU
1 Standard unit (SU) = 18 mm
General Notes
·
The operating instructions must be handed over to the
client.
·
Any faulty device is to be sent together with a return de-
livery note of the local Siemens office.
·
If you have further questions concerning the product
please contact our technical support:
'
+49 (911) 895-7222
7
+49 (911) 895-7223
*
www.siemens.com/automation/support-request
D1
