GAMMA
instabus
Technical Product Information
December 2014
IP Control Center N152
5WG1 152-1AB01
Siemens AG
N 152, 4 Pages
Technical Manual
Infrastructure & Cities Sector, Building Technologies
Control Products and Systems
ã
Siemens AG 2014
Update: http://www.siemens.com/gamma
P. O. Box 10 09 53, D-93009 Regensburg
Subject to change wihout further notice
2.11.1.15/1
Product and function description
The IP Control Center N152 is a device for DIN-rail
mounting.
It offers the following functions:
·
A web server for operating and observing KNX sys-
tems is incorporated in this device.
·
A standard web browser displays the operating pages,
(tested browsers, see application program description)
·
A graphics web editor projects a fully graphic view with
control and display elements in various styles.
·
Application modules:
-
Time switch schedules with up to 300 time switch
commands per week
-
Scenes module with up to 5000 scenes or events
-
Full graphic Logic module with up to 1000 Logic
functions
-
Alarm function with up to 250 different alarm mes-
sages
-
Email function with up to 20 contacts
are configured via a graphics web editor.
·
An additional smart editor allows the intuitive and
quick preparation of simple visualisations for smart-
phones with mobile browser or for room control units.
·
It provides an interface to KNX installations via data
networks, using the Internet Protocol (IP). Concur-
rently, this device provides communication from KNX
devices with PCs or other data processing equipment
(KNXnet/IP tunnelling).
The device is configured with the settings using ETS 3/4.
It defines the data types for the 250 available KNX
communications objects and provides basic information
for the device and for network settings.
The following data types can be chosen at the parameter
setting of the communication objects:
·
1 bit
·
1 Byte (0…100%)
·
1 Byte unsigned
·
1 Byte signed
·
2 Byte unsigned
·
2 Byte signed
·
2 Byte float
·
4 Byte unsigned
·
4 Byte signed
·
4 Byte float
·
14 Byte text
Further 1000 group addresses can be linked together di-
rectly with the visualisation components.
The following default settings can be placed on the de-
vice:
·
The IP address of the device is assigned by ETS con-
figuration or automatically by a DHCP service in the IP
network. Assigning of the IP address by a DHCP ser-
vice allows changes to the IP address without config-
uring the device with the ETS.
·
When configuring the device with a fixed IP address
and subnet mask, a standard gateway or router can
also be defined. This gives subscribers the opportunity
to access the Internet or another network.
If you have queries on setting the parameters IP ad-
dress of the device and subnet masks, as well as
DHCP, you should contact your local network adminis-
trator.
·
You can set the port number of the integrated web
server.
·
Web pages for viewing and the web editor can be pro-
tected separately with different passwords.
·
The device can be set both as a time master (syn-
chronisation by time server via IP) and as a time slave
(synchronisation by KNX telegrams).
·
A further parameter sets a read requirement. This will
send an update to the object values after a restart/bus
reset.
The device is delivered with a preset IP setting:
Delivery status:
IP address: 192.168.1.133
Additional Information
http://www.siemens.com/gamma
