Siemens HOTEL SOLUTION HTC3.2 Series Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 10

Siemens HOTEL SOLUTION HTC3.2 Series Скачать руководство пользователя страница 1

s

6

320

HOTEL

SOLUTION™

Room operator unit

HTC3.2/..

Room unit to operate individual room control systems in hotel rooms

•

Displays room temperature setpoint and setpoint adjustment

•

Individual setpoint adjustment with "plus" and "minus" membrane switches

•

Individual manual fan-speed selection for fan control (up to 3 speeds) or
selection of "Auto" operating mode

•

Measurement of room temperature with a built-in or externally connected
temperature sensor

Application

The HTC3.2 operator unit for control of indoor room conditions is used in conjunction
with the HRC3.1/HRC3.2 room controllers. The room operator unit detects the
temperature and transmits it to the HRC3.1/HCR3.2 room controllers for room
temperature control. The room operator unit displays the operating mode in the hotel
room and can be used to operate the fan coil unit, either manually or automatically via
the connected room controller.

CM2N6320en
01.09.2008

Building Technologies

1
2
3
...
»

Содержание HOTEL SOLUTION HTC3.2 Series











Отзывы:

Нет отзывов