en
Childproof lock
22
18.4 Setting a programme
The appliance selects the optimal type of heating, tem-
perature and cooking time. All you need to do is set
the weight.
Notes
¡
You can set the weight only in the intended range.
¡
After the programme starts, you can no longer
change the programme and the weight.
1.
Use the function selector to set .
2.
The temperature selector remains at .
3.
Use or to set the required programme.
4.
Press
.
5.
Use or to set the weight of your food. Always
set the next higher weight.
‒
The display shows the calculated cooking time.
You cannot change the cooking time.
‒
On some programmes, you can delay the end
time using .
"Setting the end time", Page 20
‒
To change the programme, press
.
a
After a few seconds, the programme starts and the
cooking time counts down.
a
If the programme has ended, an audible signal
sounds and the display shows the cooking time as
zero.
6.
When the programme ends:
‒
Press any button to end the signal prematurely.
‒
To set a cooking time for further cooking,
press . The appliance will resume heating us-
ing the programme settings.
‒
When the dish is ready, switch off the appliance.
19 Childproof lock
Secure the appliance to prevent children from accident-
ally switching it on or changing the settings.
Note:
The option to set the childproof lock can be ac-
tivated in the Basic settings →
19.1 Activating and deactivating the
childproof lock
Requirement:
The function selector must be set to the
off position.
▶
To activate the childproof lock, press and hold the
button until appears in the display.
‒
To deactivate the childproof lock, press and hold
the
button until goes out in the display.
20 Basic settings
You can configure the basic settings for your appliance to meet your needs.
20.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Selection
Signal duration upon completion of a
cooking time or timer period
= 10 seconds
= 30 seconds
1
= 2 minutes
Waiting time until a setting is adop-
ted
= 3 seconds
1
= 6 seconds
= 10 seconds
Acoustic signal when a button is
pressed
= off
= on
1
Brightness of the display illumination
= dark
= medium
1
= bright
Childproof lock can be adjusted
= no
= yes
1
= yes, with door lock
Interior lighting during operation
= no
= yes
1
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications